DES-3550 Layer 2 Fast Ethernet Switch
enable igmp_snooping
Purpose Used to enable IGMP snooping on the Switch.
Syntax
enable igmp_snooping {forward_mcrouter_only}
Description This command allows you to enable IGMP snooping on the Switch. If
forward_mcrouter_only is specified, the Switch will only forward all
multicast traffic to the multicast router, only. Otherwise, the Switch
forwards all multicast traffic to any IP router.
Parameters
forward_mcrouter_only − Specifies that the Switch should only
forward all multicast traffic to a multicast-enabled router. Otherwise,
the Switch will forward all multicast traffic to any IP router.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable IGMP snooping on the Switch:
DES-3550:4#enable igmp_snooping
Command: enable igmp_snooping
Success.
DES-3550:4#
165
To Next Page
Loading...
