DES-3550 Layer 2 Fast Ethernet Switch
show igmp_snooping
Purpose Used to show the current status of IGMP snooping on the Switch.
Syntax
show igmp_snooping {vlan <vlan_name 32>}
Description This command will display the current IGMP snooping configuration
on the Switch.
Parameters
<vlan_name 32> − The name of the VLAN to view the IGMP
snooping configuration for.
Restrictions None.
Example usage:
To show IGMP snooping:
DES-3550:4#show igmp_snooping
Total Entries: 2
DES-3550:4#
Command: show igmp_snooping
IGMP Snooping Global State : Disabled
Multicast router Only : Disabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
VLAN Name : vlan2
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 260
Route Timeout : 260
Leave Timer : 2
Querier State : Disabled
Querier Router Behavior : Non-Querier
State : Disabled
167
To Next Page
Loading...
