D-Link DES-3550 - Page 179

DES-3550 Layer 2 Fast Ethernet Switch
show limited multicast address
Purpose Used to show per-port Limited IP multicast address range.
Syntax
show limited multicast address {<portlist>}
Description The show limited multicast address command allows you to show
multicat address range by ports.
Parameters <portlist> A port or range of ports on which the limited multicast
address range to be shown has been assigned.
Restrictions None.
Example usage:
To show the limited multicast address on ports 1-3:
DES-3550:4#show limited multicast address 1-3
2 224.1.1.1 224.1.1.2 permit enable
Command: show limited multicast address 1-3
Port From To Access Status
---- -------------- --------------- -------- -------
1 224.1.1.1 224.1.1.2 permit enable
3 224.1.1.1 224.1.1.2 permit enable
DES-3550:4#
175