DES-3550 Layer 2 Fast Ethernet Switch
config radius delete
Purpose Used to delete a previously entered RADIUS server configuration.
Syntax
config radius delete <server_index 1-3>
Description The config radius delete command is used to delete a previously
entered RADIUS server configuration.
Parameters
<server_index 1-3> − Assigns a number to the current set of
RADIUS server settings. Up to 3 groups of RADIUS server settings
can be entered on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete previously configured RADIUS server communication settings:
DES-3550:4#config radius delete 1
Command: config radius delete 1
Success.
DES-3550:4#
198
To Next Page
Loading...
