D-Link DES-3550 - Appendix C; Cable Lengths

DES-3550 Layer 2 Fast Ethernet Switch
show radius
Purpose Used to display the current RADIUS configurations on the Switch.
show radius
The show radius command is used to display the current RADIUS
configurations on the Switch.
Syntax
Description
Parameters None.
Restrictions None.
Example usage:
Command: show radius
To display RADIUS settings on the Switch:
DES-3550:4#show radius
Index IP Address Auth-Port Acct-Port Status Key
Number Number
----- ------------------ --------- --------- ----------- ------------
1 10.1.1.1 1812 1813 Active switch
2 20.1.1.1 1800 1813 Active des3226
3 30.1.1.1 1812 1813 Active dlink
Total Entries : 3
DES-3550:4#
200