DES-3550 Layer 2 Fast Ethernet Switch
show access_profile
Purpose Used to display the currently configured access profiles on the
Switch.
Syntax
show access_profile {profile_id <value 1-255>
{access_id <value 1-65535>}}
Description The show access_profile command is used to display the currently
configured access profiles.
Parameters profile_id – Specify the profile id to display only the access rules
configuration for a single profile id.
access_id - Specify the access id to display the access rule
configuration for the access id.
Restrictions Only administrator-level users can issue this command.
211
To Next Page
Loading...
