DES-3550 Layer 2 Fast Ethernet Switch
enable sntp
Purpose To enable SNTP server support.
enable sntp
Description This will enable SNTP support. SNTP service must be separately
configured (see config sntp). Enabling and configuring SNTP
support will override any manually configured system time settings.
Parameters None.
Restrictions Only administrator-level users can issue this command. SNTP
settings must be configured for SNTP to function (config sntp).
Syntax
Example usage:
To enable the SNTP function:
DES-3550:4#enable sntp
Command: enable sntp
Success.
DES-3550:4#
219
To Next Page
Loading...
