DES-3550 Layer 2 Fast Ethernet Switch
show iproute
Purpose Used to display the Switch’s current IP routing table.
Syntax
This command will display the Switch’s current IP routing table.
Restrictions None.
show iproute
Description
Parameters None.
Example Usage:
To display the contents of the IP routing table:
DES-3550:4#show iproute
Routing Table
Command: show iproute
IP Address/Netmask Gateway Interface Hops Protocol
--------------- --------------- --------------- ---- -----------
0.0.0.0 10.1.1.254 System 1 Default
10.0.0.0/8 10.48.74.122 System 1 Local
Total Entries: 2
DES-3550:4#
240
To Next Page
Loading...
