DES-3550 Layer 2 Fast Ethernet Switch
config mac_notification ports
Purpose Used to configure MAC address notification status settings.
Syntax
config mac_notification ports [<portlist | all] [enable | disable]
Description MAC address notificiation is used to monitor MAC addresses learned
and entered into the FDB.
Parameters <portlist> - Specify a port or range of ports to be configured.
all – Entering this command will set all ports on the system.
[enable | disable] – These commands will enable or disable MAC
address table notification on the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable port 7 for MAC address table notification:
DES-3550:4#config mac_notification ports 7 enable
Command: config mac_notification ports 7 enable
Success.
DES-3550:4#
244
To Next Page
Loading...
