DES-3550 Layer 2 Fast Ethernet Switch
Each command is listed, in detail, in the following sections.
enable authen_policy
Purpose Used to enable system access authentication policy.
enable authen_policy
This command will enable an administrator-defined authentication
policy for users trying to access the Switch. When enabled, the
device will check the method list and choose a technique for user
authentication upon login.
Restrictions Only administrator-level users can issue this command.
Syntax
Description
Parameters None.
Example usage:
To enable the system access authentication policy:
DES-3550:4#enable authen_policy
Command: enable authen_policy
Success.
DES-3550:4#
250
To Next Page
Loading...
