DES-3550 Layer 2 Fast Ethernet Switch
delete authen_enable method_list_name
Purpose Used to delete a user-defined method list of authentication methods
for promoting normal user level privileges to Administrator level
privileges on the Switch.
Syntax
delete authen_enable method_list_name <string 15>
Description This command is used to delete a user-defined method list of
authentication methods for promoting user level privileges to
Adminstrator level privileges.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the given enable method list the user wishes to delete.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the user-defined method list “Permit”
DES-3550:4#delete authen_enable method_list_name Permit
Command: delete authen_enable method_list_name Permit
Success.
DES-3550:4#
262
To Next Page
Loading...
