DES-3550 Layer 2 Fast Ethernet Switch
show authen application
Purpose Used to display authentication methods for the various applications
on the Switch.
Syntax
show authen application
Description This command will display all of the authentication method lists (login,
enable administrator privileges) for Switch configuration applications
(console, telnet, ssh, web) currently configured on the Switch.
Parameters None.
Restrictions None.
Example usage:
To display the login and enable method list for all applications on the Switch:
DES-3550:4#show authen application
Command: show authen application
Application Login Method List Enable Method List
----------------- ------------------ ------------------------
Console default default
Telnet Trinity default
SSH default default
HTTP default default
DES-3550:4#
266
To Next Page
Loading...
