DES-3550 Layer 2 Fast Ethernet Switch
show authen server_group
Purpose Used to view authentication server groups on the Switch.
Syntax
show authen server_group <string 15>
Description This command will display authentication server groups currently
configured on the Switch.
This command will display the following fields:
Protocol: The authentication protocol used by the server host.
Group Name: The name of the server group currently configured on
the Switch, including built in groups and user defined groups.
IP Address: The IP address of the server host.
Parameters <string 15> - Enter an alphanumeric string of up to 15 characters to
define the previously created server group to be viewed.
Entering this command without the <string> parameter will display all
authentication server groups on the Switch.
Restrictions None.
Example usage:
tacacs+ (This group has no entry)
To view authentication server groups currently set on the Switch.
DES-3550:4#show authen server_group
Command: show authen server_group
Group Name IP Address Protocol
--------------- --------------- --------
Darren 10.53.13.2 TACACS
tacacs 10.53.13.94 TACACS
xtacacs (This group has no entry)
Total Entries : 4
DES-3550:4#
275
To Next Page
Loading...
