D-Link DES-3550 - IP Address

DES-3550 Layer 2 Fast Ethernet Switch
Command Parameters
config snmp engineID <snmp_engineID>
show snmp engineID
create snmp group <groupname 32> {v1 | v2c |v3 [noauth_nopriv | auth_nopriv | auth_priv ]}
{read_view <view_name 32> | write_view <view_name 32> | notify_view <view_name
32>}
delete snmp group <groupname 32>
show snmp groups
create snmp host <ipaddr> {v1 |v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]} <auth_string 32>
delete snmp host <ipaddr>
show snmp host <ipaddr>
create trusted_host <ipaddr>
delete trusted_host <ipaddr>
show trusted_host <ipaddr>
enable snmp traps
enable snmp
authenticate_traps
show snmp traps
disable snmp traps
disable snmp
authenticate_traps
config snmp system
contact
<sw_contact>
config snmp system
location
<sw_location>
config snmp system
name
<sw_name>
enable rmon
disable rmon
Each command is listed, in detail, in the following sections.
34