DES-3550 Layer 2 Fast Ethernet Switch
delete snmp view
Purpose Used to remove an SNMP view entry previously created on the
Switch.
Syntax
delete snmp view <view_name 32> [all | <oid>]
Description
The delete snmp view command is used to remove an SNMP view
previously created on the Switch.
Parameters
<view_name 32> − An alphanumeric string of up to 32 characters that
identifies the SNMP view to be deleted.
all − Specifies that all of the SNMP views on the Switch will be
deleted.
<oid> − The object ID that identifies an object tree (MIB tree) that will
be deleted from the Switch.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete a previously configured SNMP view from the Switch:
DES-3550:4#delete snmp view dlinkview all
Command: delete snmp view dlinkview all
Success.
DES-3550:4#
39
To Next Page
Loading...
