D-Link DES-3550 - Page 50

DES-3550 Layer 2 Fast Ethernet Switch
Example usage:
To create an SNMP group named “sg1:”
DES-3550:4#create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Command: create snmp group sg1 v3 noauth_nopriv read_view v1
write_view v1 notify_view v1
Success.
DES-3550:4#
delete snmp group
Purpose Used to remove an SNMP group from the Switch.
Syntax
delete snmp group <groupname 32>
Description
The delete snmp group command is used to remove an SNMP
group from the Switch.
Parameters
<groupname 32> − An alphanumeric name of up to 32 characters that
will identify the SNMP group the new SNMP user will be associated
with.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete the SNMP group named “sg1”.
DES-3550:4#delete snmp group sg1
Command: delete snmp group sg1
Success.
DES-3550:4#
46