D-Link DES-3550 - Page 54

DES-3550 Layer 2 Fast Ethernet Switch
Example usage:
To create an SNMP host to receive SNMP messages:
DES-3550:4#create snmp host 10.48.74.100 v3 auth_priv public
Command: create snmp host 10.48.74.100 v3 auth_priv public
Success.
DES-3550:4#
delete snmp host
Purpose Used to remove a recipient of SNMP traps generated by the Switch’s
SNMP agent.
Syntax
delete snmp host <ipaddr>
Description
The delete snmp host command deletes a recipient of SNMP traps
generated by the Switch’s SNMP agent.
Parameters
<ipaddr> − The IP address of a remote SNMP manager that will
receive SNMP traps generated by the Switch’s SNMP agent.
Restrictions Only administrator-level users can issue this command.
Example usage:
To delete an SNMP host entry:
DES-3550:4#delete snmp host 10.48.74.100
Command: delete snmp host 10.48.74.100
Success.
DES-3550:4#
50