DES-3550 Layer 2 Fast Ethernet Switch
show trusted_host
Purpose Used to display a list of trusted hosts entered on the Switch using
the create trusted_host command above.
Syntax
show trusted_host <ipaddr>
Description This command is used to display a list of trusted hosts entered on
the Switch using the create trusted_host command above.
Parameters
<ipaddr> − The IP address of the trusted host.
Restrictions None.
Example Usage:
To display the list of trust hosts:
DES-3550:4#show trusted_host
Command: show trusted_host
Management Stations
IP Address
-----------------------
10.53.13.94
Total Entries: 1
DES-3550:4#
53
To Next Page
Loading...
