DES-3550 Layer 2 Fast Ethernet Switch
Example usage:
To view the current configuration settings:
DES-3550:4#show config current_config
Command: show config current_config
#-------------------------------------------------------------------
# DES-3550 Configuration
#
# Firmware: Build 3.01-B20
# Copyright(C) 2000-2004 D-Link Corporation. All rights reserved.
#-------------------------------------------------------------------
# BASIC
config serial_port baud_rate 9600 auto_logout 10_minutes
enable telnet 23
enable web 80
# STORM
config traffic control 1-5 broadcast disable multicast disable dlf
disable thres
hold 128
# GM
config sim candidate
CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All
68
To Next Page
Loading...
