DES-3550 Layer 2 Fast Ethernet Switch
To display the current cpu utilization:
DES-3550:4#show utilization cpu
Command: show utilization cpu
CPU utilization :
--------------------------------------------------------------------------------------------
Five seconds - 15% One minute - 25% Five minutes - 14%
DES-3550:4#
clear counters
Purpose Used to clear the Switch’s statistics counters.
Syntax
clear counters {ports <portlist>}
Description This command will clear the counters used by the Switch to compile
statistics.
Parameters
<portlist> − Specifies a port or range of ports to be displayed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To clear the counters:
DES-3550:4#clear counters ports 2-9
Command: clear counters ports 2-9
Success.
DES-3550:4#
80
To Next Page
Loading...
