D-Link DGS-1210/ME series - Appendix A - Ethernet Technology

DGS-1210/ME series Metro Ethernet Switch Hardware Installation Guide
24
Appendix A - Ethernet Technology
The appendix contains the device specifications, and contains the topics:
• Technical Specifications
• Supported Transceivers
Technical Specifications
Performance
Transmission Method
Store-and-forward
Packet Buffer memory
DGS-1210-10/ME: 1.5Byutes
DGS-1210-20/ME: 1.5Byutes
DGS-1210-28/ME: 1.5Byutes
DGS-1210-28P/ME: 1.5Byutes
DGS-1210-52/ME: 3.0Byutes
64 Bytes Max. Packet Forwarding Rate
Full-wire speed for all connections.
DGS-1210-10/ME: 14.88Mpps
DGS-1210-20/ME: 29.8Mpps
DGS-1210-28/ME: 41.7Mpps
DGS-1210-28P/ME: 41.7Mpps
DGS-1210-52/ME: 77.4Mpps
MAC Address Learning
Automatic update. Supports 16K MAC address.
Priority Queues
8 Priority Queues per port.
Forwarding Table Age Time
Max age: 10–600 seconds.
Default = 300.
Physical and Environmental
AC Inputs
AC Input: 100 – 240 VAC, 50-60 Hz
Power Consumption
DGS-1210-10/ME:
Maximum power consumption: 13.59Watts
Standby power consumption: 9.4Watts
DGS-1210-20/ME:
Maximum power consumption: 16.09Watts
Standby power consumption: 8.80Watts
DGS-1210-28/ME:
Maximum power consumption: 22.45Watts
Standby power consumption: 17.65Watts
DGS-1210-28P/ME:
Maximum power consumption: 200.3Watts
Standby power consumption: 14.83Watts
DGS-1210-52/ME :
Maximum power consumption: 38.27Watts
Standby power consumption: 29.49Watts
DC Fans
DGS-1210-10/ME: Fanless
DGS-1210-20/ME: Fanless
DGS-1210-28/ME: Fanless
DGS-1210-28P/ME: Smart fan