D-Link DGS-1210/ME series - Page 9

DGS-1210/ME series Metro Ethernet Switch Hardware Installation Guide
5
5
 LEDs for Power, Console, Link/Act for port 1 ~ 20.
Figure 1.2 – DGS-1210-20/ME Front Panel
CAUTION: The MiniGBIC ports should use UL listed
Optical Transceiver product, Rated Laser Class I. 3.3Vdc.
The front panel of the DGS-1210-28/ME switch consists out of the following:
 24 10/100/1000Mbps Copper Ports
 4 1000Mbps SFP port
 One RJ-45 Console Port
 LEDs for Power, Console, Link/Act for port 1 ~ 28
Figure 1.3 – DGS-1210-28/ME Front Panel
CAUTION: The MiniGBIC ports should use UL listed
Optical Transceiver product, Rated Laser Class I. 3.3Vdc.
The front panel of the DGS-1210-52/ME switch consists out of the following:
 48 10/100/1000Mbps Copper Ports
 4 1000Mbps SFP port
 LEDs for Power, Console, Fan Error , Link/Act for port 1 to 52
Figure 1.4 – DGS-1210-52/ME SERIES Front Panel
CAUTION: The MiniGBIC ports should use UL listed
Optical Transceiver product, Rated Laser Class I. 3.3Vdc.
The front panel of the DGS-1210-28P/ME switch consists out of the following:
 24 10/100/1000Mbps Copper Ports
 4 1000Mbps SFP port
 One RJ-45 Console Port
 LEDs for Power, Console, Fan Error, Pwr Max, Link/Act for port 1 to 28
 Mode: By pressing the Mode button, the Port LED will switch between Link/Act and PoE modes.