17
Firmware Upgrade: When the device has a new function, there will be a
new firmware to update the device; use this function to upgrade the firmware
Figure 12.
Web Access: Double click the device in the Monitor List or select a device in
the Monitor List and press the “Web Access” button to access the device in
Web browser.
Toolbar
The toolbar in the Web Management Utility has four main tabs: File, View,
Options, and Help.
In the “File TAB”, there is Monitor Save, Monitor Save As, Monitor Load,
and Exit.
Monitor Save: To record the settings of the Monitor List to the default
settings so that when you open the Web Management Utility the next time, it
will automatically load the default recorded setting.
z Monitor Save As: To record the setting of the Monitor List to an
appointed filename and file path.
z Monitor Load: To manually load the setting file of the Monitor List.
z Exit: To exit the Web Management Utility.
In the “View TAB”, there are the view log and clear log functions: the view
log function will help you display trap settings.
z View Log: To display the event of the Web Management Utility and
the device.
z Clear Log: To clear the log.
To Next Page
Loading...
Need help?
General