37
Trap Setting
The Trap Setting enables the device to monitor the Trap through the Web
Management Utility, set the Trap IP Address of the manager where the trap to
be sent.
Figure 39. Trap Setting
System Events: Monitoring the system’s trap.
Device Bootup: a trap when booting up the system.
Illegal Login: a trap when there is using a wrong password login, and it
will record from where the IP to be login.
Fiber Port Events: Monitoring the Fiber port status.
Link Up/Link Down: a trap when there is linking status happens in
fiber port.
Abnormal* Receive Error: a trap when there are receive data error in
fiber port.
Abnormal* Transmit Error: a trap when there are transmit data error
in fiber port.
Copper Port Events: Monitoring the Copper port status.
Link Up/Link Down: a trap when there is linking status happens in
copper port.
Abnormal* Receive Error: a trap when there are receive data error in
copper port.
Abnormal* Transmit Error: a trap when there are transmit data error
in copprt port.
Abnormal*: 50 error packet count within 10 seconds.
To Next Page
Loading...
Need help?
General