xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
1114
<session> unsuccessfully. (Username: <username>, IP:
<ipaddr>, MAC: <macaddr>)
Parameters description:
unitID: Represent the id of the device in the stacking system.
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware uploaded successfully.
Log Message: [RCP(3):]Firmware uploaded by <session>
successfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Firmware upload unsuccessfully.
Log Message: [RCP(4):]Firmware upload by <session>
unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
Event description: Configuration downloaded successfully.
Log Message: [RCP(5):]Configuration downloaded by <session>
successfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
username: Represent current login user.
ipaddr: Represent client IP address.
macaddr : Represent client MAC address.
Event description: Configuration download unsuccessfully.
Log Message: [RCP(6):]Configuration download by <session>
unsuccessfully. (Username: <username>, IP: <ipaddr>, MAC:
<macaddr>)
Parameters description:
session: The user’s session.
To Next Page
Loading...
