D-Link DGS-3620-52P - Page 296

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
291
Format
debug ospf show log state
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example
To display the debug OSPF log state:
DGS-3620-28SC:admin# debug ospf show log state
Command: debug ospf show log state
OSPF Log State : Enabled
DGS-3620-28SC:admin#
20-26 debug ospf show redistribution
Description
This command is used to display the current internal OSPF redistribute list.
Format
debug ospf show redistribution
Parameters
None.
Restrictions
Only Administrator level users can issue this command.
Example
To display the current OSPF redistribution list: