xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
418
To set the R-APS timer parameter:
DGS-3620-28SC:admin#config erps raps_vlan 4094 timer holdoff_time 100
guard_time 1000 wtr_time 10
Command: config erps raps_vlan 4094 timer holdoff_time 100 guard_time 1000
wtr_time 10
Success.
DGS-3620-28SC:admin#
31-6 config erps log
Description
This command is used to configure the ERPS log state.
Format
config erps log [enable | disable]
Parameters
enable - Enable the log state. The default value is disabled.
disable - Disable the log state.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To set the log state:
DGS-3620-28SC:admin#config erps log enable
Command: config erps log enable
Success.
DGS-3620-28SC:admin#
31-7 config erps trap
Description
This command is used to configure trap state of ERPS events.
Format
config erps trap [enable | disable]
To Next Page
Loading...
