D-Link DGS-3620-52P - Page 724

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
719
Command: disable snmp authenticate_traps
Success.
DGS-3620-28SC:admin#
66-14 enable snmp linkchange_traps
Description
This command is used to enable SNMP linkchange trap support.
Format
enable snmp linkchange_traps
Parameters
None.
Restrictions
Only Administrator and Operator-level users can issue this command..
Example
To enable SNMP linkchange trap support:
DGS-3620-28SC:admin#enable snmp linkchange_traps
Command: enable snmp linkchange_traps
Success.
DGS-3620-28SC:admin#
66-15 disable snmp linkchange_traps
Description
This command is used to disable SNMP linkchange trap support.
Format
disable snmp linkchange_traps
Parameters
None.