D-Link DGS-3620-52P - Page 836

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
831
Example
To enable the embedded RP state:
DGS-3620-28SC:admin# config pim6 embedded_rp state enable
Command: config pim6 embedded_rp state enable
Success.
DGS-3620-28SC:admin#
74-16 show pim6 crp
Description
This command is used to list all candidate rendezvous pint (RP) related information.
Format
show pim6 crp
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
To show the C-RP information:
DGS-3620-28SC:admin# show pim6 crp
Command: show pim6 crp
PIM6 Candidate-RP Table
Group Interface Priority Interval
------------------ ------------- --------- ---------
FF1E:90::/64 System 192 150
Total Entries: 1
DGS-3620-28SC:admin#
74-17 show pim6 static_rp
Description
This command is used to list all static RP settings.