D-Link DGS-3620-52P - Page 837

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
832
Format
show pim6 static_rp
Parameters
None.
Restrictions
None. (EI Mode Only Command)
Example
To show the static RP:
DGS-3620-28SC:admin# show pim6 static_rp
Command: show pim6 static_rp
PIM6 Static RP Table
---------------------------------------------
Group : FF1E:9B::/64
RP Address : 3000::1
Override Dynamic : True
Group : FF1E:9C::/64
RP Address : 3000::5
Override Dynamic : False
Total Entries: 2
DGS-3620-28SC:admin#
74-18 show pim6 rpset
Description
This command is used to list the entire active RP information.
Format
show pim6 rpset
Parameters
None.
Restrictions
None. (EI Mode Only Command)