100D-Link DIR-820L User Manual
The Status page displays the current Internet and connection details for the DIR-820L. It displays the WAN, LAN, and Wireless
information. If your Internet connection is set up for a Dynamic IP address then a Release button and a Renew button will be
displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.
If your Internet connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect
to drop the PPPoE connection and use Connect to establish the PPPoE connection.
Displays the MAC Address and the public IP settings.
Displays the MAC Address and the private (local) IP settings for the
router.
Displays the 2.4GHz wireless MAC Address and your wireless settings
such as Network Name (SSID) and Channel.
Displays the 5GHz wireless MAC Address and your wireless settings
such as Network Name (SSID) and Channel.
Displays computers and devices that are connected to the router via
Ethernet and that are receiving an IP Address assigned by the router
(DHCP).
Displays Multicast Group Address.
WAN:
LAN:
Wireless LAN:
Wireless LAN2:
LAN Computers:
IGMP Multicast
Memberships:
Device Info
Status
To Next Page
