D-Link DIR-820L - System

94D-Link DIR-820L User Manual
Use this option to save the current router
conguration settings to a le on the hard disk of
the computer you are using. First, click the Save
Conguration button. A le dialog will appear,
allowing you to select a location and le name for
your conguration settings.
Use this option to load your previously saved router
conguration settings. Use the Choose File option
to nd a previously saved le of your conguration
settings. Then, click the Restore Conguration
from le button to transfer your settings to the
router.
Click Restore Factory Defaults to restore all
conguration settings back to the settings that
were in eect at the time the router was shipped
from the factory. Any settings that have not been
saved will be lost, including any rules that you have
created. If you want to save your current router
conguration settings, use the Save Conguration
button above.
Click to reboot the router.
Save Settings to
Local Hard Drive:
Load Settings
from Local Hard
Drive:
Restore to
Factory Default
Settings:
Reboot the
Device:
System
The System Settings section allows you to manage the router’s conguration settings. You can reboot the router, and restore the
router to the factory default settings. Restoring the unit to the factory default settings will erase all settings, including any rules
that you’ve created. This is why you should save your settings to a conguration le when your router is congured the way
you want it. Then you can reload your conguration in the event you have to reboot the router and your settings are erased.