EasyManua.ls Logo

D-Link DIR-820L - Advanced Network Settings

D-Link DIR-820L
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
86D-Link DIR-820L User Manual
To use the Universal Plug and Play (UPnP
) feature check
the box. UPnP provides compatibility with networking
equipment, software and peripherals.
Checking the box will allow the DIR-820L to respond to
pings. Unchecking the box may provide extra security
from hackers.
Select Allow All or Deny All.
You may set the WAN Port Speed of the Internet port to
10Mbps, 100Mbps, or leave it at the default setting of
Auto 10/100Mbps (recommended).
If you are having diculty receiving multicast streams
from the Internet, make sure this box is checked. It allows
multicast traffic to pass through the router from the
Internet (IPv4).
Check the box to allow multicast trac to pass through
the router from the Internet (IPv6).
Enable UPnP:
Enable WAN Ping
Respond:
WAN Ping Inbound
lter:
WAN Port Speed:
Enable Multicast
Streams:
Enable IPV6
Multicast Streams:
Advanced Network Settings

Table of Contents

Other manuals for D-Link DIR-820L

Related product manuals