83D-Link DIR-820L User Manual
Advanced Wireless
For both the 2.4GHz and 5GHZ band, set the transmit
power of the antennas.
This option should only be enabled if you are in a
country that requires it. WLAN Partition enables 802.11d
operation, which is a wireless specication developed to
allow implementation of wireless networks in countries
that cannot use the 802.11 standard.
WMM is enabled by default. It is QoS (Quality of Service)
for your wireless network. WMM will improve the quality
of video and voice applications for your wireless clients.
Enable this option to reduce interference from
other wireless networks in your area. If the channel
width is operating at 40MHz and there is another
wireless network’s channel over-lapping and causing
interference, the router will automatically change to
20MHz.
Transmit Power:
WLAN Partition:
WMM Enable:
HT 20/40 Coexistence:
For best performance of your wireless network, it is recommended that you leave the Advance Wireless settings at their default values.
To Next Page
Loading...
