90D-Link DIR-820L User Manual
Admin
The Admin page allows you to change the Administrator Password and also to enable the Remote Management feature. With
Remote Management enabled, you can change the router conguration from a computer on the Internet.
Tools
Enter a new password for the Admin login name. Enter again to verify password.
Enter a name for your router.
Enables a challenge-response test to require users to type letters or numbers
from a distorted image displayed on the screen to prevent online hackers and
unauthorized users from gaining access to your router’s network settings.
Check to enable HTTPS to connect to the router securely. This means to connect
to the router, you must enter https://192.168.0.1 (for example) instead of
http://192.168.0.1.
Remote management allows the DIR-820L to be congured from the Internet
with a web browser. A username/password is still required to access the Web
Management interface.
The port number used to access the DIR-820L is used in the URL. Example:
http://x.x.x.x:8080 whereas x.x.x.x is the Internet IP address of the DIR-820L
and 8080 is the port used for the Web Management interface.
If you have enabled HTTPS Server, you must enter https:// as part of the URL
to access the router remotely.
This section will list any rules that are created. You may click the Edit icon to change the settings or enable/disable the rule, or click the Trash icon to delete the rule.
Details will display the current status.
Admin Password:
Gateway Name:
Enable Graphical
Authentication:
Enable HTTPS
Server:
Enable Remote
Management:
Remote Admin Port:
Use HTTPS:
Remote Admin
Inbound Filter:
To Next Page
Loading...
