D-Link DIR-820L - Time

91D-Link DIR-820L User Manual
Time
Displays the current date and time of the router.
Select your Time Zone from the drop-down
menu.
Check the box to Enable Daylight Saving. To
set the start and end of Daylight Saving Time
manually, enter a DST Start date and a DST End
date. (Month, Week, Day of Week, and Time.)
An NTP server (for Network Time Protocol) will
sync the time and date with your router. This will
only connect to a server on the Internet, not a
local server. Check the box to enable this feature.
Enter the IP address of a NTP server or select one
from the drop-down menu.
To manually input the date and time, enter the
values for the Year, Month, Day, Hour, Minute,
and Second. Click Set Time.
You can also click Copy Your Computer’s Time
Settings to synch the date and time with the
computer you are currently on.
Current Router
Time:
Time Zone:
Enable Daylight
Saving:
Enable NTP Server:
NTP Server Used:
Set Date and Time
Manually:
The Time page allows you to congure, update, and maintain the correct time on the internal system clock. From this section
you can set the Time Zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving Time can also be
set to automatically adjust the time when needed.