D-Link DIR-820L - Inbound Filters

79D-Link DIR-820L User Manual
Enter a name for the inbound lter rule.
Select Allow or Deny.
Check to enable rule.
Enter the starting IP address. Enter 0.0.0.0
if you do not want to specify an IP range.
Enter the ending IP address. Enter
255.255.255.255 if you do not want to
specify an IP range.
Click the Add button to apply your settings.
This section will list any rules that you
create. You can click the Edit icon to change
the settings or enable/disable the rule, or
click the Trash icon to remove the rule.
Name:
Action:
Remote IP
Range: Enable:
Remote IP Start:
Remote IP End:
Add:
Inbound Filter
Rules List:
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can
congure inbound data ltering rules that control data based on an IP address range. Inbound Filters can be used with Virtual
Server, Port Forwarding, or Remote Administration features.
Inbound Filters