D-Link Dis-200G Series

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
179
Use this command to create a view of MIB objects.
Example
This example shows how to create a MIB view called “interfacesMibView” and define an SNMP group
“guestgroup” with “InterfaceMIBView” as the read view.
Switch# configure terminal
Switch(config)# snmp-server view interfacesMibView 1.3.6.1.2.1.2 included
Switch(config)# snmp-server group guestgroup v3 auth read interfacesMibView
Switch(config)#