D-Link Dis-200G Series User Manual

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
59
12. File System Commands
12-1 delete
This command is used to delete a file.
delete FILE-URL
Parameters
FILE-URL
Specifies the name of the file in flash. Sytax: <flash:filename>.
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 15.
Usage Guideline
The firmware image or the default configuration file cannot be deleted.
Example
This example shows how to delete the file named “office.cfg” from file system on the local flash.
Switch# delete flash:office.cfg
12-2 dir
This command is used to display the information for files in the flash.
dir
Parameters
none
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1.

D-Link Dis-200G Series Specifications

General

Brand	D-Link
Model	Dis-200G Series
Category	Switch
Language	English