D-Link Dis-200G Series User Manual

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
160
31. Safeguard Engine Commands
31-1 cpu-protect safeguard
This command is used to enable the Safeguard Engine. Use the no form of this command to disable the
Safeguard Engine.
cpu-protect safeguard
no cpu-protect safeguard
Parameters
None.
Default
By default, Safeguard Engine is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
The Safeguard Engine can help the overall operability of the device by minimizing the workload of the Switch
while the attack is ongoing, thus making it capable to forward essential packets over its network in a limited
bandwidth.
Example
This example shows how to enable the Safeguard Engine.
Switch# configure terminal
Switch(config)# cpu-protect safeguard
Switch(config)#
31-2 show cpu-protect safeguard
This command is used to display the status of the Safeguard Engine.
show cpu-protect safeguard
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.

D-Link Dis-200G Series Specifications

General

Brand	D-Link
Model	Dis-200G Series
Category	Switch
Language	English