D-Link Dis-200G Series

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
227
41-2 show time-range
This command is used to display the time range profile configuration.
show time-range [ NAME ]
Parameters
NAME
(Optional) Specifies the name of the time-range profile to be
displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the name is not specified, all configured time-range profiles will be displayed.
Example
This example shows how to display all the configured time ranges.
Switch#show time-range
Time Range Profile: rdtime
Daily 09:00 to 12:00
Weekly Saturday 00:00 to Monday 00:00
Time Range Profile: lunchtime
Daily 12:00 to 13:00
Total Entries: 2
Switch#