DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
262
LLDP
A lldpRemTablesChange notification is sent when the
value of lldpStatsRemTableLastChangeTime changes. It
can be utilized by an NMS to trigger LLDP remote
systems table maintenance polls.
Binding objects:
(1) lldpStatsRemTablesInserts
(2) lldpStatsRemTablesDeletes
(3) lldpStatsRemTablesDrops
(4) lldpStatsRemTablesAgeouts
The newRoot trap indicates that the sending agent has
become the new root of the Spanning Tree; the trap is
sent by a bridge soon after its election as the new root,
e.g., upon expiration of the Topology Change Timer,
immediately subsequent to its election. Implementation
of this trap is optional.
A topologyChange trap is sent by a bridge when any of
its configured ports transitions from the Learning state
to the Forwarding state, or from the Forwarding state to
the Blocking state. The trap is not sent if a newRoot trap
is sent for the same transition. Implementation of this
This trap indicates PSE Threshold usage indication is
on, the usage power is above the threshold. At least 500
msec must elapse between notifications being emitted
by the same object instance.
Binding objects:
(1) pethMainPseConsumptionPower
This trap indicates PSE Threshold usage indication is
off, the usage power is below the threshold. At least 500
msec must elapse between notifications being emitted
by the same object instance.
Binding objects:
(1) pethMainPseConsumptionPower
This Notification indicates if the PD device has the stop
working or no response problem.
To Next Page
Loading...
Need help?
General
