D-Link Dis-200G Series

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
27
show ipv6 interface [ INTERFACE-ID ] brief
Parameters
INTERFACE-ID
Specifies the interface for display.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display IPv6 interface related configurations.
Example
This example shows how to display IPv6 interface information.
Switch# show ipv6 interface brief
vlan1 is up, Link status is up
Global unicast address: 3ffe:22:33:44::55
Link-local address: fe80::201:19ff:fe11:20
Static address is 3ffe:22:33:44::55/64
Switch#