D-Link Dis-200G Series User Manual

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
81
This command is used to display IGMP snooping statistics group information on the Switch.
show ip igmp snooping static-group [ GROUP-ADDRESS | vlan VLAN-ID ]
Parameters
GROUP-ADDRESS
(Optional) Specifies the group IP address to be displayed.
vlan VLAN-ID
(Optional) Specifies the VLAN ID to be displayed.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays the IGMP snooping static group information.
Example
This example shows how to display IGMP snooping static group information.
Switch#show ip igmp snooping static-group
VLAN ID Group address Interface
------- --------------- ------------------------
2 225.1.2.32 eth1/0/1
Total Entries: 1
Switch#

D-Link Dis-200G Series Specifications

General

Brand	D-Link
Model	Dis-200G Series
Category	Switch
Language	English