D-Link Dis-200G Series

DIS-200G Series Gigabit Ethernet Switch CLI Reference Guide
86
rxHCPkt64Octets : 0
rxHCPkt65to127Octets : 0
rxHCPkt128to255Octets : 0
rxHCPkt256to511Octets : 0
rxHCPkt512to1023Octets : 0
rxHCPkt1024to1518Octets : 0
rxHCPkt1519to9216Octets : 0
txHCPkt64Octets : 0
txHCPkt65to127Octets : 0
txHCPkt128to255Octets : 0
txHCPkt256to511Octets : 138
txHCPkt512to1023Octets : 0
txHCPkt1024to1518Octets : 0
txHCPkt1519to9126Octets : 0
rxCRCAlignErrors : 0
rxUndersizedPkts : 0
rxOversizedPkts : 0
rxFragmentPkts : 0
rxJabbers : 0
rxDropPkts : 0
txCollisions : 0
txDropPkts : 0
16-6 show interfaces
This command is used to display the interface information.
show interfaces [ INTERFACE-ID [- | ,]] [status]
Parameters
INTERFACE-ID
(Optional) Specifies that the interface can be a physical port, VLAN
or other.
status
(Optional) Specifies that display the connection status.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.