Accounting Port
Enter the port the RADIUS server listens to for accounting requests. The default value is 1813.
Timeout
Set the request time-to-live in seconds. The time-to-live is the time to wait time for the
completion of an authentication request. If the request job is not completed within this interval
of time, it is cancelled. The default value is 1 second.
Retries
Set the number of times to retry a request if it cannot be completed. The default value is 3.
4.5.9 USB
This screen lets you set whether to force use of USB 1.1 with the DKVM-IP1. You should only need
to enable this setting if the Host computer does not support USB 2.0. After making any changes to
this screen, click the Apply button to save your changes.
4.5.10 Config File
On this screen, you can save the configuration of the DKVM-IP1 to file. Click the Backup button to
save the configuration to a file on the Remote computer. To restore a previously saved
configuration, click the Browse button, select the saved configuration file(usually named config.gz),
then click the Restore button.
110
To Next Page
Loading...
