D-Link DKVM-IP1 - Update Firmware

4.6.3 Update Firmware
The DKVM-IP1’s firmware can be easily updated via its web GUI. This section describes the
update procedures.

The DKVM-IP1 is a complete, independent, standalone computer. The software it runs is
called firmware. If you need to update the firmware to the latest version, the DKVM-IP1’s
firmware can be updated remotely. You can obtain the latest firmware from the D-Link
website.
Before you can start updating the firmware of your DKVM-IP1, the new, uncompressed
firmware file has to be accessible on the system that you use for connecting to the
DKVM-IP1.
To update the DKVM-IP1’s firmware, please follow these steps:
113