3.2 Logging into or out of the DKVM-IP1
3.2.1 Logging in
The DKVM-IP1 has three levels of access privileges:
User Name Default Password Access Privileges
super
(factory default)
pass
(factory default)
Full access
administrator (user-defined)
Partial rights to configure the settings of
critical functions
user (user-defined)
Rights to access basic functions of the
Host Console
The Super User can add or remove a user easily on the User Management page,
accessed by moving the mouse pointer to the left-hand column and clicking
UserManagement > Users. Please refer to Addendum C for details on what access
rights are assigned for each user level.
Getting Started
Launch a web browser, and type in the IP address that you configured for your DKVM-IP1
during the installation process.
http://<IP address of DKVM-IP1>
When using a secure (https) connection, type in:
https://<IP address of DKVM-IP1>
The browser will open the DKVM-IP1 login page, as shown below:
Above: The DKVM-IP1’s login page.
32
To Next Page
Loading...
