Clicking the Click here to navigate to D-Link’s website link will open a
web browser that will automatically navigate to D-Link’s global support
website.
The Connected Users field at the bottom of the Device Information field
(see the screenshot above) displays the status of connected users. For
every user, it lists the username, the IP address of the network host that
the user is connecting from, and the activity status.
RC means that the Host Console window is open and active on that
user’s computer.
If the Host Console is opened in Exclusive Access mode, the term
“exclusive” is added. For more information about this option, see the
section 3.3.2 Control Bar of the Host Console.
The column on the far right displays either the term “active” for an active
user, or shows the number of minutes that the user has been inactive.
4.6.2 Event log
The Event Log displays all events that are logged by the DKVM-IP1 (see screenshot below).
To configure the events that should be logged, navigate back to the Device Settings menu
and click Device Settings > Event Log. For more information about configuring the event
log, please refer to section 4.5.7 Event Log.
112
To Next Page
Loading...
