D-Link DKVM-IP1 - Making a Drive Redirection

4.2.6 Making a Drive Redirection
The steps for making a Drive Redirection are as follows:
1. Click Remote Control > KVM Console.
2. When the Host Console window appears, click on the floppy disk button
at the top right
of the window (see the screenshot below).
The Drive Redirection f
ield will open above the Host Console window, as shown in the
screenshot below. To close this field, click on the floppy disk button
again.
3.
The Remote-side user can either redirect a local drive (only available for Windows systems) or
an ISO CD/DVD disk image.
74